Natural Rubber Encyclopedia

What kinds of reclaimed rubber can be used in natural rubber to make rubber bearings to cut costs?

Create Date:2026-08-19 10:36:00Click volume:24

Rubber bearings are rubber products that use rubber elasticity to achieve load-bearing, vibration reduction, cushioning, vibration isolation, or rotational support. They are widely used in automobiles, ships, construction machinery, hydraulic engineering, bridge construction, and industrial equipment. Rubber bearings produced mainly from natural rubber have high elasticity, high tensile strength, and good fatigue resistance, but natural rubber is expensive and fluctuates greatly. Can recycled rubber be used to reduce costs?

1. Rubber bearings produced by combining natural rubber and latex reclaimed rubber

Latex reclaimed rubber is processed from waste natural rubber, waste latex, and its products. It features good elasticity, high tensile strength, high elongation at break, and low specific gravity, making it highly compatible with natural rubber and can replace some natural rubber in rubber bearings, effectively reducing raw material costs. Latex reclaimed rubber is suitable for producing rubber bearing formulations with high requirements for flexibility and elasticity, while white latex reclaimed rubber is suitable for producing color-marked rubber bearings.

2. Rubber bearings are produced by combining natural rubber with tire reclaimed rubber

Black latex reclaimed rubber

Tire reclaimed rubber is made from waste rubber tire rubber powder through desulfurization, filtration, and refining processes. It has certain elasticity, wear resistance, and processing performance. Its main components are natural rubber E6LYY7819, general synthetic rubber, and carbon black, and can partially replace natural rubber in general industrial rubber bearing formulations, reducing raw material costs; Priority is given to high-strength tire reclaimed rubber. For products subjected to large ‌rotating loads, dynamic fatigue tests must also verify the actual performance of tire reclaimed rubber.

3. Key points for formula design for rubber bearings produced using natural rubber and reclaimed rubber

When producing rubber bearings using natural rubber together with reclaimed tire rubber or latex reclaimed rubber, the co-use ratio should be adjusted according to the fineness, plasticity, impurity content, and vulcanization characteristics of the reclaimed rubber, and the reinforcement filling, softening system, and vulcanization system should be selected according to the product's intended use.

Carbon black can improve the strength and hardness of the compound, but excessive dosage may increase dynamic heat generation and affect vibration damping performance; Softeners must balance the processing performance of the compound with the elasticity of vulcanized rubber, avoiding excessive use that could affect long-term bearing stability; The vulcanization system should be adjusted based on the vulcanization characteristics of natural rubber and reclaimed rubber, determining the appropriate vulcanization time through vulcanization curves to avoid under-sulfurization or over-sulfurization.

Using black latex recycled rubber to replace natural rubber for making rubber bearings

Using reclaimed rubber to partially replace natural rubber in rubber bearings is technically feasible; the key is not "whether it can be used," but "what to use, how much, and how to fit." In terms of selection, bearing formulations with high elasticity and strength requirements should prioritize using latex reclaimed rubber, while general industrial bearing formulas should prioritize using high-strength tire reclaimed rubber; In terms of quantity, more reclaimed rubber is not always better; it is necessary to combine product load levels, dynamic fatigue requirements, and dynamic heat generation indicators to determine a reasonable natural rubber/reclaimed rubber ratio through small-scale testing, generally assuming the finished product meets performance standards and pursuing optimal cost.

Exclusive original article [commercial authorization] reprint, excerpt and excerpt in any form are prohibited without written authorization. Focus on Hongyun rubber: learn the process formula and raw material technology of producing rubber products from recycled rubber to help you reduce costs and increase profits